<cite id="nvhd1"></cite>
<var id="nvhd1"></var>
<cite id="nvhd1"><span id="nvhd1"></span></cite>
<cite id="nvhd1"><video id="nvhd1"><menuitem id="nvhd1"></menuitem></video></cite>
<var id="nvhd1"><video id="nvhd1"></video></var>
<cite id="nvhd1"></cite>
<var id="nvhd1"></var>
<menuitem id="nvhd1"><strike id="nvhd1"></strike></menuitem>
<del id="nvhd1"><noframes id="nvhd1">
<var id="nvhd1"></var>

Welcome to Wuxi jiadelong Chemical Equipment Co., Ltd. !

E-mail | Home page | Add collection

Now: Home>News
Anti corrosion and multi heat transfer mode of finned tube heat exchanger
admin Hits: 1767
In the process of using the finned tube heat exchanger, a very important link is to prevent corrosion. So in order to prevent such a phenomenon, some corrosion-resistant materials are used in the production process, such as some stainless steel, aluminum alloy, etc., which have relatively good corrosion resistance.


Effectively improve the service life of the heat exchanger. However, the cost of using such materials is generally relatively high, so the price of the purchase is also higher than the price. Some corrosion inhibitors are used. In the corrosive medium, a small amount of material is added to greatly reduce the corrosion performance of the metal, and then it is stopped. It is also some of the corrosion inhibitors we use.


Electrochemical protection is used for the protection of the cathode and anode, the protection of the cathode DC power supply and the protection of the metal surface anode. The power consumption used in this way is very large, and the cost is naturally very high. It is protected by the external power supply anode of the equipment protected by the anode protection law.


The basic function of the finned tube heat exchanger is to transfer heat and part of the heat of the hot fluid to the cold fluid. Therefore, the improvement of the heat exchanger's use capacity is to improve its heat transfer performance, thereby realizing the heat exchanger More heat transfer.


Under the premise of comprehensively considering the fluid resistance and no fluid-induced vibration, the flow rate should be as high as possible. For fluids without phase change, a heat transfer method close to countercurrent should be used as much as possible. The purpose of this is to increase the average temperature difference and reduce the temperature stress in the structure. In addition, when conditions permit, the inlet temperature of the hot fluid can be increased to lower the inlet temperature of the cold fluid.


Adopting proper tube spacing or arrangement can not only increase the heat transfer area per unit time, but also improve the flow characteristics, especially the heat transfer of poor tube bundles is better than that of parallel tube bundles. If the fluid on one side of the heat exchange device has a phase change and the fluid on the other side is in the gas phase, fins can be added to the heat transfer surface on the gas phase side to increase the heat transfer area, which is beneficial to heat transfer.
Prev: The excellent performance index of finned tube as heat exchange element
Next: Classification of finned tube radiator and its setting principle
SU-ICP 15027172-1


SU 32028202000047

中文字幕在线第亚洲,亚洲午夜无码一二线,国产精品电影一区二区在线播放幕,色爱无码aⅴ综合区,无码三级片中文二区 桃花视频免费观看在线播放1 国产成人精品日本亚洲18图 国产免费无码不卡网站 国产阿v视频高清在线观看 欧美日韩一区香蕉 日韩精品无码免费毛片 国产亚洲精品美女久久久尤物 91久久久久精品无嫩草影院 13一14处出血 日韩av无码一区二区三区不卡 精品国产偷窥丝袜在线拍国